Arducam M12 Lens Set, Lens for Raspberry Pi Camera (1/4) and Arduino, Telephoto

Arducam M12 Lens Set, Lens for Raspberry Pi Camera (1/4) and Arduino, Telephoto
Arducam M12 Lens Set, Lens for Raspberry Pi Camera (1/4) and Arduino, Telephoto
Arducam M12 Lens Set, Lens for Raspberry Pi Camera (1/4) and Arduino, Telephoto
Arducam M12 Lens Set, Lens for Raspberry Pi Camera (1/4) and Arduino, Telephoto
Arducam M12 Lens Set, Lens for Raspberry Pi Camera (1/4) and Arduino, Telephoto
Arducam M12 Lens Set, Lens for Raspberry Pi Camera (1/4) and Arduino, Telephoto
Arducam M12 Lens Set, Lens for Raspberry Pi Camera (1/4) and Arduino, Telephoto
Arducam M12 Lens Set, Lens for Raspberry Pi Camera (1/4) and Arduino, Telephoto
Arducam M12 Lens Set, Lens for Raspberry Pi Camera (1/4) and Arduino, Telephoto
Arducam M12 Lens Set, Lens for Raspberry Pi Camera (1/4) and Arduino, Telephoto
Arducam M12 Lens Set, Lens for Raspberry Pi Camera (1/4) and Arduino, Telephoto
Arducam M12 Lens Set, Lens for Raspberry Pi Camera (1/4) and Arduino, Telephoto

Arducam M12 Lens Set, Lens for Raspberry Pi Camera (1/4) and Arduino, Telephoto
Arducam M12 Lens Set, Lens for Raspberry Pi Camera (1/4) and Arduino, Telephoto, Macro, Wide Angle, Fisheye Lens Kit (10°- 200°) with M12 Lens Holder and Cleaning Cloth, Optical All-In-One. Fisheye, Macro, Telephoto, Wide Angle.

10-lens complete Kit for Raspberry Pi Camera. Why we need it: In case you're disappointed with the fixed official cameras and want precise control of what gets into the frame of your image - like how wide and how close it is - we selected, tested and labeled a bunch of lenses and shrinks it all into a complete toolbox on your palm. What's in it: This kit includes 10 M12 Lenses to cover almost any angles of view you'll ever need, 10°/20°/40°/60°/80°/100°/120°/140°/160°/200° respectively on a 1/4 Pi Camera like OV5647 and IMX219. M12 lens holders, screws, specifications and even cleaning cloth are also in the box.

What else is needed: It makes a perfect combo with "Arducam B0031", a more flexible and slightly larger camera module for Raspberry Pi that uses M12 lenses to frame up the best image. You can't use this kit directly with the official Raspberry Pi Camera Module V2 because an M12 holder or 18/20mm hole spacing of the camera board is required. NOTE: The 4 lens holders included come with 18mm/20mm hole spacing and 7mm/13mm heights. Typically lenses with a larger Field of View will require shorter holders, and that means you need to change the lens holder if the lens does not focus at all. Arducam CS Mount Cameras also work with this kit with holders replaced.

In order to meet the increasing market demands for more lens options to address different use cases, Arducam selected and tested a wide range of M12 mount optimal lenses from long focus to fisheye for shooting on your Raspberry Pi or Arduino cameras. It's now much easier for you to get the best lens you'll need, and we will keep the lens list growing in the near future. Choose a suitable lens holder as follows.

A Determine the lens holder height listed in the lens specifications for your selected lens. If you use a different lens holder height, you might not be able to focus the lens at all. B Ensure that the lens holder matches the screw hole pitch of your camera board. Lens holders are available with18mm and 20mm pitches. If required, the thread gap between the lens and lens holder can be filled with damping grease or similar glue in order to fix the lens in position after focusing.

Specks of dust or tiny bubblers might be visible on the image while focusing the lens. These will disappear when the lens is in focus, and will not affect image quality. When focusing or replacing a lens, do not screw the lens into the lens holder too deep, otherwise the lens might touch and damage the image sensor. Often, focusing a lens is performed while monitoring the image quality on a video screen.

A blurry image will result if the lens is screwed in either too deep or too shallow from where it is in focus. You have to manually remove the IR filter at the bottom of the lenses when using them with a NoIR camera. Arduino, RPi, CCTV, DSLR Cam. We offer the best prices around on high quality products.

Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P.

Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there's a problem, message us! We're happy to help.

This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Sensors\Other Sensors". The seller is "slyor_store" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.


Arducam M12 Lens Set, Lens for Raspberry Pi Camera (1/4) and Arduino, Telephoto